１．起動ログ參照ください。
２．初期化済みです。
３．動作保証は出來ませんがGBICスロット除くイーサネットポートのリンクアップのみ確認しました。
４．全體的に所々キズがあります。
５．電源ケーブルは純正ではありませんので、動作確認用としてのみ使用ください。（200Vでは使用できません。）
＜3560 起動ログ＞
Using driver version 1 for media type 1
Base ethernet MAC Address: e8:04:62:7a:b9:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
mifs[2]: 0 files, 1 directories
mifs[2]: Total bytes : 3870720
mifs[2]: Bytes used : 1024
mifs[2]: Bytes available : 3869696
mifs[2]: mifs fsck took 0 seconds.
mifs[3]: 387 files, 7 directories
mifs[3]: Total bytes : 27998208
mifs[3]: Bytes used : 14048768
mifs[3]: Bytes available : 13949440
mifs[3]: mifs fsck took 8 seconds.
...done Initializing Flash.
done.
Loading "flash:/c3560-ipservices-mz.122-50.SE1/c3560-ipservices-mz.122-50.SE1.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
（中略）
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade.. not needed
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Waiting for Port download...Complete
cisco WS-C3560-8PC (PowerPC405) processor (revision F0) with 122880K/8184K bytes of memory.
Processor board ID FOC1432V14C
Last reset from power-on
1 Virtual Ethernet interface
8 FastEthernet interfaces
1 Gigabit Ethernet interface
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : **:**:**:**:**:**
Motherboard assembly number : **-*****-****
Power supply part number : ***-****-**
Motherboard serial number : ************
Power supply serial number : ************
Model revision number : F0
Motherboard revision number : A0
Model number : WS-C3560-8PC-S
System serial number : ***********
Top Assembly Part Number : ***-*****-**
Top Assembly Revision Number : A0
Version ID : V04
CLEI Code Number : ***********
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 9 WS-C3560-8PC 12.2(50)SE1 C3560-IPSERVICES-M
Press RETURN to get started!
*Mar 1 00:00:39.762: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:00:40.063: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 1 00:01:01.647: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(50)SE1, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 06-Apr-09 02:26 by amvarma
--- System Configuration Dialog ---
Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0 <cleartext password>
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]:
＜2960 起動ログ＞
Using driver version 1 for media type 1
Base ethernet MAC Address: e8:04:62:fb:32:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
mifs[2]: 0 files, 1 directories
mifs[2]: Total bytes : 3870720
mifs[2]: Bytes used : 1024
mifs[2]: Bytes available : 3869696
mifs[2]: mifs fsck took 0 seconds.
mifs[3]: 536 files, 19 directories
mifs[3]: Total bytes : 27998208
mifs[3]: Bytes used : 11984896
mifs[3]: Bytes available : 16013312
mifs[3]: mifs fsck took 7 seconds.
...done Initializing Flash.
done.
Loading "flash:c2960-lanbase-mz.122-53.SE2/c2960-lanbase-mz.122-53.SE2.bin"...@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@
（中略）
mifs[4]: mifs fsck took 1 seconds.
mifs[4]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade.. not needed
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Waiting for Port download...Complete
cisco WS-C2960-8TC-L (PowerPC405) processor (revision D0) with 65536K bytes of memory.
Processor board ID FOC1433V2KG
Last reset from power-on
1 Virtual Ethernet interface
8 FastEthernet interfaces
1 Gigabit Ethernet interface
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : **:**:**:**:**:**
Motherboard assembly number : **-*****-**
Power supply part number : ***-*****-**
Motherboard serial number : ************
Power supply serial number : ************
Model revision number : D0
Motherboard revision number : A0
Model number : WS-C2960-8TC-L
System serial number : *************
Top Assembly Part Number : ***-*****-**
Top Assembly Revision Number : A0
Version ID : V03
CLEI Code Number : *************
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 9 WS-C2960-8TC-L 12.2(53)SE2 C2960-LANBASE-M
Press RETURN to get started!
*Mar 1 00:00:36.364: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:00:36.532: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 1 00:00:57.352: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(53)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 21-Apr-10 05:52 by prod_rel_team
--- System Configuration Dialog ---
Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0 <cleartext password>
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: